WATERPROOFING FEATURES
- Seamless Low modulus elastomeric membrane.
- Retains flexibility over a wide temperature range
- Excellent adhesion to most construction surfaces such as concrete, stone, wood, preserved wood, metal, and polystyrene insulation (ICF).
- Can be applied to damp or green concrete.
- Bridges cracks
- Contains no solvent and is environmentally friendly.
- Can be applied in one coat or in multiple coats or in multiple coats with reinforcing fabric (CAN/CGSB-37.3).
USES
Used for waterproofing poured and block foundation walls, insulated concrete forms (ICF), footings, split slab floors, and retaining walls for residential construction.
WATERPROOFING PHYSICAL PROPERTIES
| Colour: | Black |
| Solids by volume: | 60% (approx.) |
| Weight: | 1.0 kg/L (8.4 lbs/U.S. gal) |
| Coverage (per coat): | 0.5 to 2 L/m2 (1.2 to 5 U.S. gal/100 ft2) |
| Drying Time: | 50% R.H. 20oC (68oF) 24 hours minimum |
| Application Temperature: | 5oC (40oF) minimum |
| Service Temperature: | Minus 40oC to 60oC (-40oF to 140oF) |
| Tensile Strength: | 320 kPa (typical) |
| (ASTM D412) | (50 psi) |
| Elongation: | 2000% (typical) |
| (ASTM D412) | |
| Peel strength after 7 days: | 735 N/m (typical) |
| Water immersion | (4.2 lbs/in.) |
| (ASTM D3330 Modified) | |
| Maximum VOC: | 10 g/L |
| Low Temperature Flexibility: | No cracking, flaking or loss of adhesion |
| (CAN/CGSB 37.2M) | |
| Water Vapour Permeance | |
| (ASTM E96): | 10 ng/Pa.m2 .s (0.2 perms) |
| Water Resistance (ASTM D466): | No re-emulsification or loss of adhesion |
| Flammability | |
| Wet: | Non-Flammable |
| Dry: | Burns |
| Chemical Resistance: | Resistant to mild acids, alkalis, salt and calcium chloride solutions. |
call today: 416-747-1920 or click here for a FREE estimate
